XENOY ? Resin 5220U

SI

| British

| Metric

| PDF

Europe-Africa-Middle East: COMMERCIAL

Unreinforced PBT+PC alloy. Improved retention of mechanical properties under UV. Excellent low temperature/chemical

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, yield, 50 mm/min	50	MPa	ISO 527
Tensile Strain, break, 50 mm/min	120	%	ISO 527
Tensile Modulus, 1 mm/min	2050	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	80	MPa	ISO 178
Flexural Modulus, 2 mm/min	2000	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, unnotched 80*10*4 +23°C	NB	kJ/m2	ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C	NB	kJ/m2	ISO 180/1U
Izod Impact, notched 80*10*4 +23°C	50	kJ/m2	ISO 180/1A
Izod Impact, notched 80*10*4 -30°C	30	kJ/m2	ISO 180/1A
Izod Impact, notched 80*10*4 -40°C	20	kJ/m2	ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm	55	kJ/m2	ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm	35	kJ/m2	ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm	NB	kJ/m2	ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm	NB	kJ/m2	ISO 179/1eU
THERMAL	Value	Unit	Standard
Thermal Conductivity	0.2	W/m-°C	ISO 8302
CTE, 23°C to 80°C, flow	9.E-05	1/°C	ISO 11359-2
CTE, 23°C to 80°C, xflow	9.5E-05	1/°C	ISO 11359-2
Ball Pressure Test, 75°C +/- 2°C	PASSES	-	IEC 60695-10-2
Vicat Softening Temp, Rate A/50	155	°C	ISO 306
Vicat Softening Temp, Rate B/50	120	°C	ISO 306
Vicat Softening Temp, Rate B/120	125	°C	ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm	105	°C	ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm	82	°C	ISO 75/Ae
Relative Temp Index, Elec	75	°C	UL 746B
Relative Temp Index, Mech w/impact	75	°C	UL 746B
Relative Temp Index, Mech w/o impact	75	°C	UL 746B
PHYSICAL	Value	Unit	Standard
Mold Shrinkage on Tensile Bar, flow (2) (5)	0.7 - 1.1	%	SABIC Method
Mold Shrinkage on Tensile Bar, xflow (2) (5)	0.7 - 1.1	%	SABIC Method
Density	1.22	g/cm3	ISO 1183
Water Absorption, (23°C/sat)	0.5	%	ISO 62
Moisture Absorption (23°C / 50% RH)	0.15	%	ISO 62
Melt Volume Rate, MVR at 250°C/5.0 kg	14	cm3/10 min	ISO 1133
ELECTRICAL	Value	Unit	Standard
Dielectric Strength, shorttime, 1.0mm	18	kV/mm	IEC 60243-1
Dielectric Strength, in oil, 3.2 mm	17	kV/mm	IEC 60243-1
Relative Permittivity, 1 MHz	3.3	-	IEC 60250
Dissipation Factor, 50/60 Hz	0.002	-	IEC 60250
Dissipation Factor, 1 MHz	0.02	-	IEC 60250
Relative Permittivity, 50/60 Hz	3.3	-	IEC 60250
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Recognized, 94HB Flame Class Rating (3)	1.5	mm	UL 94

Source GMD, last updated:2005/11/23

Processing

Parameter
Injection Molding	Value	Unit
Drying Temperature	90 - 100	°C
Drying Time	2 - 4	hrs
Maximum Moisture Content	0.02	%
Melt Temperature	255 - 270	°C
Nozzle Temperature	250 - 265	°C
Front - Zone 3 Temperature	250 - 270	°C
Middle - Zone 2 Temperature	240 - 265	°C
Rear - Zone 1 Temperature	230 - 250	°C
Hopper Temperature	40 - 60	°C
Mold Temperature	60 - 80	°C

Source GMD, last updated:2005/11/23

Compare	Contact Us
	XENOY? Resin
	Grades	Description
	1102	Unreinforced PC/polyester alloy. Excellent low temperatue impact/chemical resistance to automotive fluids.  Datasheet  Product Data:  Auto Data:
	1760T	11% GF impact modified PBT+PC blend, excellent flow for doorhandles  Datasheet  Product Data: Engineering Design Data  Auto Data:
	5220U	Unreinforced PBT+PC alloy. Improved retention of mechanical properties under UV. Excellent low temperature/chemical reistance.  Datasheet  Product Data: Engineering Design Data  Auto Data:
	5720U	PBT+PC, UV-Stabilizer, High Impact, Impact Modified, UV-Stabilized,  Datasheet  Product Data:  Auto Data:
	6370	30% Glass filled PBT blend, with low warpage characteristics and good ductility.  Datasheet  Product Data: Engineering Design Data  Auto Data:
	CL100	General purpose grade for unpainted exterior automotive applications.  Datasheet  Product Data: Engineering Design Data  Auto Data: Auto Specification
	CL101	PBT+PC, Mold Release, Heat Stabilized, High Impact, Datasheet  Product Data: Engineering Design Data  Auto Data: Auto Specification
	CL500U	Good impact and chemical resistance. UV resistent.  Datasheet  Product Data: Engineering Design Data  Auto Data:
	X4820	PBT+PC, Mineral Filler + Fibrillated Network, Impact Modified, Opaque,  Datasheet  Product Data:  Auto Data:
	X4830	PBT+PC, Mineral, Impact Modified,  Datasheet  Product Data:  Auto Data:
	X4850	PBT+PC, Mineral, Impact Modified,  Datasheet  Product Data:  Auto Data:
	X5300WX	Unreinforced, opaque PBT+PC alloy. Chemical resistance and good mechanical performance. UV-stabilized. Excellent weatherability.  Datasheet  Product Data:  Auto Data:
	XL1562	Impact modified PBT+PC blend, outstanding chemical resistance, good UV stability and flow properties.  Datasheet  Product Data: Engineering Design Data  Auto Data:

上一篇： SABIC PC+PBT XENOY ? Resin 1760T 玻璃纖維材料11%

下一篇： XENOY PC+PBT 5720U 化學抵抗低溫,紫外線穩定.

轉載請注明：轉載自環球塑化資訊網 http://www.j165.com/news/
本文鏈接：http://www.j165.com/b-shabo/news270043/
免責聲明：本文"sabic塑料物性表 XENOY ? Resin 5220U pc+pbt"僅代表作者個人觀點，與環球塑化網無關。環球塑化網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡。電話：400-115-2868