亚洲日韩小电影在线观看_无码欧精品亚洲日韩一区_吸咬奶头狂揉60分钟视频_久久久婷婷五月亚洲97号色

彪維流體設備閥門(上海)有限公司

疏水閥,截止閥,止回閥,安全閥,球閥,過濾器,排氣閥,氣控閥,排氣閥,減壓閥等等各種閥門

產品分類
聯系方式
友情鏈接
  • 暫無鏈接
您當前的位置:首頁 » 供應產品 » 斯派莎克SV607安全閥
斯派莎克SV607安全閥
點擊圖片查看大圖
產品/服務: 瀏覽次數:358斯派莎克安全閥 
型 號: SV607安全閥 
規 格: 原裝進口,規格齊全 
品 牌: 斯派莎克Spirax Sarco 
單 價: 電議/面議 
起訂量: 1 臺 
供貨總量: 1000 臺
發貨期限: 自買家付款之日起 3 天內發貨
更新日期: 2016-04-06  有效期至:長期有效
聯 系 人: ( 登錄可見 )
公司電話: ( 登錄可見 )
即時通訊: ( 登錄可見 )


«上一個產品     下一個產品»
產品屬性
 產品型號:  SV607安全閥
 產品規格:  原裝進口,規格齊全
 產品品牌:  斯派莎克Spirax Sarco
產品優勢
斯派莎克SV607安全閥:全行程、全噴嘴安全閥。適用于蒸汽、空氣不起化學作用的工業氣體和非危險液體的應用。用于蒸汽或熱水鍋爐,發生器、壓力容器、儲氣罐和空氣壓縮機,高壓釜減壓閥的下游保護等。 口徑DN15~50,壓力PN25,螺紋BSP或NPT連接,對于DN15~25可提供衛生級卡箍連接。密封性能符合API527標準。可提供軟密封閥芯。SV607/SV604安全閥:全行程法蘭連接安全閥。主要應用于蒸汽鍋爐管道。壓力容器、壓縮機和儲氣罐等的防護及大多數的工業過程設備的防護。
詳細信息
斯派莎克SV607全行程、全噴嘴安全閥,適用于蒸汽、空氣、不起化學作用不起化學作用的工業氣體和非危險性液體的應用。
應用   
斯派莎克SV607安全閥:全行程、全噴嘴安全閥。適用于蒸汽、空氣不起化學作用的工業氣體和非危險液體的應用。用于蒸汽或熱水鍋爐,發生器、壓力容器、儲氣罐和空氣壓縮機,高壓釜減壓閥的下游保護等。
口徑DN15~50,壓力PN25,螺紋BSP或NPT連接,對于DN15~25可提供衛生級卡箍連接。密封性能符合API527標準。可提供軟密封閥芯。SV607/SV604安全閥:全行程法蘭連接安全閥。主要應用于蒸汽鍋爐管道。壓力容器、壓縮機和儲氣罐等的防護及大多數的工業過程設備的防護。
符合DIN320 TRD421的要求,具有TUV認證,口徑DN20~DN150,SV607壓力級為PN16/25,SV604為PN40/AN300,可提DIN標準法蘭和ANSI標準法蘭。密封性能符合API527標準。根據客戶要求可提供軟密封閥芯。
    斯派莎克安全閥設計先進,品種齊全,材質廣泛(青銅、球鐵、碳鋼、合金鋼、不銹鋼等材質),使用溫度范圍廣泛,所有產品均有機構的認證。,能提供符合不同標準要求的安全閥。
Spirax Sarco SV607 whole trip , the whole nozzle valve for steam, air , application role can not afford chemical inert industrial gases and non- hazardous liquids.
Application
SV607 safety valve : the whole trip , the whole nozzle valve . Suitable for the application of steam , air can not afford chemical industrial gases and non- hazardous liquids . For steam or hot water boilers, generators , pressure vessels , gas tank and air compressor , autoclave valve downstream protection.
Diameter DN15 ~ 50, the pressure PN25, BSP or NPT threaded connections DN15 ~ 25 provides for sanitary clamp connections . Sealing performance meets API527 standards. Provides a soft seal spool . SV607/SV604 safety valve : full stroke valve flange connection . Mainly used in steam boiler pipes. Pressure vessels, compressors and cylinders and other protective guard and most of the industrial process equipment.
Comply with the requirements of DIN320 TRD421 with TUV certification , caliber DN20 ~ DN150, SV607 pressure level is PN16/25, SV604 is PN40/AN300, can provide standard flanges and ANSI standards DIN flanges . Sealing performance meets API527 standards. According to customer requirements to provide a soft seal spool .
    Spirax Sarco advanced valve design , full range , the material widely ( bronze, ductile iron , carbon steel, alloy steel, stainless steel and other materials ) , widely used in the temperature range , all products are certified authority . To provide a safety valve meets the requirements of the different standards .
In the vacuum station system, in order to prevent the rated pressure relief valve downstream pressure is higher than the equipment operation , valves must be installed downstream of the valve . Pressure relief valve must be set within the maximum allowable operating pressure range of the device between the normal operating pressure and there is enough pressure to prevent the valve sealing surface damage resulting in frequent jump . Relief valve setting must be performed by qualified personnel. When the safety valve selection should guarantee the safety valve set pressure through the valve can flow through the maximum flow .
The following parameters:
1 , system or equipment must displacement and the proposed number of valves installed .
2, the opening pressure ( or set pressure )
3 , and the proportion of medium (liquid medium ) or molecular weight and compressibility factor ( for gaseous media )
4, the valve inlet medium temperature
5 , if there is back pressure , if any, is the number
6 , requires valve performance standards ( eg no special specified , specified by the supplier

相關產品
0條  相關評論
 免責聲明:(1)以上所展示的信息由企業自行提供,內容的真實性、準確性和合法性由發布企業負責,環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! (2)同時我們鄭重提醒各位買/賣家,交易前請詳細核實對方身份,切勿隨意打款或發貨,謹防上當受騙。如發現虛假信息,請向環球塑化網舉報。
網站首頁公司介紹供應產品新聞中心榮譽資質人才招聘聯系方式舉報
©2025 環球塑化網 版權所有   技術支持: 環球塑化網     訪問量:10635  管理入口

QR code
關閉
關閉
請輸入驗證碼
主站蜘蛛池模板: 永兴县| 盈江县| 专栏| 阿克陶县| 乐陵市| 贵定县| 盈江县| 淮安市| 连山| 都兰县| 英山县| 顺平县| 华阴市| 确山县| 潢川县| 达州市| 进贤县| 綦江县| 丹凤县| 巫山县| 乌拉特前旗| 宁国市| 任丘市| 抚州市| 秭归县| 绿春县| 衡水市| 新营市| 南汇区| 仁怀市| 富阳市| 黄石市| 许昌县| 神池县| 襄垣县| 临桂县| 汤原县| 临泽县| 南阳市| 黔西县| 香港|